Oil containment liners | Oil Barriers Australasia

SEALED AND PORTABLE OIL CONTAINMENT LINERS

Prevent Oil Spills With SPI’s Containment Liners

All of Solidification Products International’s containment liners are engineered as “complete oil-spill containment systems” and are proven to prevent oil spills and drain unwanted rainwater at all times using “patented technology.”

SPI’s containment liner systems are “completely sealed,” leaving nothing to chance where your valuable property and total compliance are concerned.

Contact SPI directly to receive valuable information about our “sealed” liner systems, whose quality and price are unmatched by any competitor.

GET A QUOTE

Man in PPE installing an oil containment liner

oil containment liner installed using SPI angle brackets

SPI ANGLE BRACKET BERMS

The SPI Angle Bracket Berm is a one-piece, thermally bonded Oil Spill Containment Berm. It’s light enough to carry but tough enough to contain vehicles, generators, or even above-ground oil tanks and electrical transformers — whether energized or idle. Unlike other containment berms, setup is quick and easy; simply unfold the berm and insert the in-wall angle-iron brackets. The berms can be equipped with Petro-Pipes® for water drainage and total oil containment. The ground tarp goes down first and the Berm is laid out in a matter of minutes.

A patented Petro-Pipe® is installed to drain rainwater on a continuous basis and you’ve got years of worry-free spill containment, preventing all compliance issues.

NEED OIL CONTAINMENT LINERS?

GET A QUOTE

SPI ANGLE BRACKET BERMS - FEATURES AND BENEFITS

Features

Side walls are reinforced with aluminium stays in a triangular configuration.
In the event of a spill, we incorporate semi-rigid wall supports instead of floating walls that are susceptible to containment failures.
Strong, durable, lightweight double-ribbed aluminium stays to support the berm side walls.
In the event that a bracket is damaged, it can be quickly bent right back into shape.
All berm side walls have a one-inch top hem, which provides added strength and integrity to the secondary containment and prevents the fabric from fraying.
RF welding ensures a longer berm life expectancy and keeps potential berm failure at a minimum.
All SPI secondary containment berms are designed with wrap-around diagonal welds. Corners are a weak point on most berms, but not SPI Berms. By removing welds from the corners, we have eliminated the issues associated with corner design.
SPI secondary containment berms can be staked down at 2-foot intervals, allowing the end-user to secure the berm well and eliminate wind as a placement issue.

Benefits

No Leaks Ever or ANYWHERE
The entire System is Specially Designed to Direct All Rainwater Through a Completely SEALED Drainage System!
In the Event of a Major Spill, You Don’t Have to Dig Up and Replace the Entire Liner System like you do with any Competitive Technology!