OIl-BOND™
Oil Bond Makes Oil Spill Solidification Clean Up Simple
A solidification particulate that is listed on the EPA’s National Contingency Plan (NCP) Schedule, Oil Bond by Solidification Products International is applied directly to oil on water or solid surfaces. Oil in water is absorbed into Oil Bond and rapidly turns into a solid cohesive material that is removable from water.
Oil Bond is available in 4.5kg pails and 18kg bags.
BOOMS
Oil Bond Booms Absorb and Solidify Oil on Land or Water
Oil Bond booms are both absorbent and solidifying. In this picture, the boom on the left is fully absorbed with more than five times its weight in oil; the boom on the right is unused.
Oil Bond booms are available in different lengths, including 1m x 65mm diameter (pictured), 3m x 65mm, 2m x 125mm, 3m x 125mm and 6m x 125mm. Custom sizes are also available.
GRANULES
Oil Bond is applied to the oil and immediately absorbs the oil while turning darker in colour. After a few minutes, the cup can be inverted and the solidified oil and water are retained. No liquid escapes.
The solidified oil is removed in one piece, leaving uncontaminated water.
In a utility vault, Oil Bond is used to absorb transformer oil off the surface of the water. The solidified oil was removed from the water surface the next day in one solid sheet.
The oil will also solidify within one hour if quicker removal time is required but will be removed in smaller solid pieces. There may still be an oil sheen, but that can be removed with other SPI products.
NEED OIL-BOND?
PILLOWS
Oil Bond Pillows Absorb and Solidify Oils and Fuels
The SPI Oil Bond pillow on the left is fully absorbed with oil; the Oil Bond pillow on the right is unused. The Oil Bond pillows are cut open, showing the used pillow fully absorbed with oil at up to five times its unused weight. Unused media can be seen in the unused pillow.
Oil Bond pillows and Booms are used in this application to absorb and contain any leaking oil from escaping during rainstorms.
Patented, State of the Art, Oil Spill Containment Products.
Home page images sourced from Unsplash.
CONTACT
NEW ZEALAND
Peter Stockley
peter@oilbarriers.co.nz
0064 274 858 763
AUSTRALIA
Warren Leedes
warren@oilbarriers.co.nz
0061 459 661571